*The pneumatic drill is ideal for pilot hole drilling in a production line.
*The drill has non-variable speed set to 1800 rpm.
*A compressor is required with an air flow delivery of at least 106 l/min at 6.3 Bar to make use of the drill.
*Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
| Description | Specification |
| Working pressure | 6.3 Bar |
| Free speed | 1800 rpm |
| Average air consumption | 106 l/min |
| Suggested minimum compressor HP | 2 HP |
| Chuck size | 10mm |
